03 Engine, Internals - M104

Crankshaft

• 03-1800 - Removing and installing crankshaft

Connecting rods

• 03-3100 - Checking, replacing and tightening conrod bolts
• 03-3130 - Servicing, aligning and mounting conrod in bearings

Pistons

• 03-3160 - Removing and installing pistons
• 03-3165 - Pistons, matching and dimensions
• 03-3170 - Replacing piston rings

Assembly

• 03-3180 - Checking and servicing crankshaft
• 03-3190 - Crankshaft Machine dimensions and identifications
• 03-3200 - Mounting crankshaft in bearings
• 03-3240 - Replacing front crankshaft radial seal
• 03-3270 - Replacing rear crankshaft radial seal
• 03-3420 - Removing and installing belt pull/vibration damper and hub
• 03-3422 - Arrangement of belt pulley/vibration damper
• 03-3450 - Checking, correcting setting of TDC sensor

Flywheel

• 03-4100 - Removing and installing flywheel or driven plate
• 03-4600 - Function of two-mass flywheel
• 03-4620 - Removing and installing two-mass flywheel
• 03-4640 - Removing and installing needle bush in two-mass flywheel
• 03-5000 - Removing and installing holding lock for crankshaft/ring gear

---