01 General Engine Work - OM606

Maintenance Jobs

• 0101 - Engine oil and filter change
• 6190 - Removing and installing engine compartment lower panel

Service Information

• 00/57A - Revised checking/correcting oil level procedure

---

Engine, crankcase

• 01-0110B - Cranking engine with starter
• 01-0110D - Cranking engine with starter
• 01-0110HA - Cranking engine with starter
• 01-0200HA - Inspecting cylinders with light probe
• 01-1200HA - Testing compression pressure
• 01-1300HA - Testing cylinder leaktightness
• 01-2400HA - Removing, installing engine
• 01-2400HB - Removing, installing engine
• 01-2400HC - Removing, installing engine
• 01-2410D - Disconnecting, connecting engine wiring harness
• 01-2410G - Disconnecting, connecting engine wiring harness
• 01-2410H - Disconnecting, connecting engine wiring harness
• 01-2410HA - Disconnecting, connecting engine wiring harness
• 01-2410HB - Disconnecting, connecting engine wiring harness

Cylinder head, timing case

• 01-5014HA - Removing, installing cylinder head cover
• 01-5402HA - Removing, installing prechamber
• 01-5800HA - Removing, installing cylinder head
• 01-7162B - Checking, facing cylinder head contact surface
• 01-8000HA -Removing, installing timing case cover

Crankcase, cylinder bores

• 01-8498A - Knocking out, inserting steel ball of main oil gallery
• 01-8499HA - Replacing core hole plugs in crankcase
• 01-8913HA - Removing, installing end cover
  • F15 - Inspect rear of engine for external oil leaks
• 01-9133B - Machining crankcase contact surface
• 01-9202A - Measuring cylinder bores
• 01-9271A - Widening cylinder bore in crankcase

Cylinder, oil sump

• 01-9272A - Removing cylinder liner
• 01-9273A - Installing cylinder liner
• 01-9291A - Machining and polishing the cylinders
• 01-7500C - Removing, installing oil sump
• 01-7500D - Removing, installing oil sump
• 01-7500HA - Removing, installing oil sump

---